Home > News > Content

Contact Us

Add: B210 No.Y132, Xueyuannan Street, Haidian, 100082, Beijing, China

Tel: +86-10-62260266

Fax: +86-10-62267899

E-mail: Raymond.Xia@we-know-how.cn

The High Speed Winding Machine Installs The Posture Correctly
Sep 06, 2017

The high speed Winding Machine installs the posture correctly
Due to the improper installation of the equipment caused by its greatly shortened life, resulting in additional cost of clothing machinery factory. So how do you install the high speed winder correctly? Come here today to talk about it!
    For the use of Winding Machine business, the requirements of the site is to build suitable for winding equipment and placement of the foundation or workstations to meet the Winding Machine on the location of the environment requirements, the specific requirements generally have the following:
    1. Winding Machine table and foundation must be with the type of Winding Machine base to adapt, and to ensure that the installation of the Winding Machine is firm and reliable, to ensure a reliable grounding around the equipment to ensure that there is no large interference around the source The
    2. Winding Machine table and foundation should have sufficient strength and stiffness, to avoid Winding Machine high-speed dynamic vibration generated when the Winding Machine to ensure that the vibration does not affect their own accuracy and life, not shock and affect the coil Quality, adjacent equipment and buildings should not be wound
The machine has a bad effect.
    3. Winding Machine table and foundation should have stability and durability, waterproof anti-skid and harmful objects of the erosion, to ensure that no deformation or local subsidence. When the Winding Machine is placed in an environment where it is possible to withstand chemical liquids, fluids or corrosion, the foundation shall be covered with a protective layer. For example, the surface of the foundation coated with anti-acid, oil-resistant cement mortar, and set drainage, collecting groove.
    4. The center of gravity of the Winding Machine and the center of gravity of the table and foundation are located on the same vertical line as the centripetal force of the foundation.
    5. The foundation of the large Winding Machine should be preloaded before the machine is installed. The quality of the preload is 1.25 times the total mass of the winder and the maximum mass of the customer workpiece. Preload can be made of steel, sand and small stones. Preload should be evenly pressed on the foundation to ensure that the foundation even subsidence. Preloading work to be carried out to the foundation no longer continue to sink so far.
        When the Winding Machine is installed in the correct way on the appropriate foundation, the Winding Machine can not produce the deformation, wear and vibration due to the high speed operation, so it can keep the body rigidity and the coil quality of the Winding Machine for a long time. Small and medium-sized Winding Machine, you need a relatively strong workstations, the need for the workstations need to install the appropriate shock absorber, if the Winding Machine to install the fulcrum of the number and distribution of improper or fixed method is unreasonable, it will affect the machine Performance and longevity. Before dismantling the Winding Machine, it must first be clear that the dismantling of the Winding Machine should serve the principle of assembly. If the technical information (such as electrical drawings, mechanical drawings, etc.) of the dismantling Winding Machine is incomplete, and there is no actual technical support from the original manufacturer, it is necessary to dismantle the written writing and even the record of the dismantling process. So that after the completion of the installation.
Winding Machine used in the manufacturing industry was very successful, Winding Machine varieties are constantly evolving, winder, pagoda machine, automatic Winding Machine, wire machine has been widely used in modern industrial processing applications.
Winding Machine as the name suggests is the linear object wrapped around a specific workpiece on the machine. Most electrical products need to use enameled copper wire (referred to as enameled wire) around the induction coil, you need to use the Winding Machine.
Winding Machine as one of the electronic equipment industry in China has been produced and used for many years, since the reform and opening up, China's component factory has also introduced a number of foreign Winding Machine.